Viewing 9 posts - 1 through 9 (of 9 total)
  • 27.2 seatpost with >0.5" setback?
  • foxwelljsly
    Free Member

    Looking for a 27.2 seatpost with a greater than 0.5″ setback to mount a Brookes B17 to a MTB/Trekking/Tourer based on a Kona Kula Frame.

    The B17 has very little fore and aft adjustment and sits a little too forward on the Raceface deus XC seatpost in relation to the BB for me with any of my parts bin seatposts that all have 0.5″ setback.

    Any suggestions?

    cheers

    nbt
    Full Member

    Raceface XY if you can get your hands on one, not been made for sometime but there are plenty knocking around still secondhand

    davewalsh
    Free Member

    The Ragley Spike has approx 1″ of layback.

    njee20
    Free Member

    Bontrager do 20mm.

    andyh2
    Free Member

    Thorn / SJS cycles do one, lots here;
    http://www.sjscycles.co.uk/seat-posts-rigid-dept292_pg1/#order=NAME ASCENDING

    Might be best to give them a ring and discuss what you’re after

    thomthumb
    Free Member

    velo orange grand cru is designed for brooks saddles, it’s got 30 mm set back.

    available here

    MostlyBalanced
    Free Member

    FSA posts are available with up to 30mm layback.

    chives
    Free Member

    Thomson layback post’s about 16mm (0.625″) from memory.

    Northwind
    Full Member

    My old FSA had about a foot of layback.

Viewing 9 posts - 1 through 9 (of 9 total)

The topic ‘27.2 seatpost with >0.5" setback?’ is closed to new replies.