Viewing 2 posts - 1 through 2 (of 2 total)
  • 24" fork 1" threaded steerer options
  • hpil
    Free Member

    I picked up a Ridgeback MX24 for daughter #1 (9) for £35. The plan is that we’ll have it for a while – daughter #2 (6) is a pip-squeak so it should last her sometime when its handed on. Perhaps unsurprisingly the fork is shot – perished boots and oil pissing from one leg and dried oil smears on the other. Its a quill stem – OD for the quill is just over 22mm and OD for the frame steerer tube is 37mm. What are the options – am I stuck with the 1″ threaded and 1″ quill, or can I change the headset to take a 1″ threadless or a 1 1/8″ threadless and open up some options for better forks?

    jonathan
    Free Member

    You definitely be able to switch to 1″ ahead if you can find a suitable fork. 1″ aheadsets are pretty common (standard road size for a good while), then you’ll just need a suitable stem.

    Pretty sure you wouldn’t be able to go 1 1/8″.

Viewing 2 posts - 1 through 2 (of 2 total)

The topic ‘24" fork 1" threaded steerer options’ is closed to new replies.