Viewing 4 posts - 1 through 4 (of 4 total)
  • 2012 SID 100mm dual air pressures….
  • Kryton57
    Full Member

    Just wondering, I’m having difficulty with pressures as some initial stiction delays the Neg pulling the stantion down until 150psi in the neg chamber.

    So, is their anyone 13st kitted up that can comment on their pressures – I’m getting 25% sag at 80/85 pos/neg…? Fork feels stiff though.

    Kryton57
    Full Member

    Bump?

    I’m starting to wonder if the SID just isn’t an weekend warrior “plush” type of fork, I guess so anyway with its intended use in mind.

    FYi, 75+ / 85- seems to be todays setting (rising in mud) at 82kg with 4 click of LSC.

    Any comparison from anyone else?

    mtbfix
    Full Member

    I have 2010 SIDs and when generally trundling about I have to run both chambers well below the recommended pressures. I’m about 82kg and run about 90lbs in both chambers.

    Spin
    Free Member

    I think you might find that your R2 unit has a bad motivator.

Viewing 4 posts - 1 through 4 (of 4 total)

The topic ‘2012 SID 100mm dual air pressures….’ is closed to new replies.