Overview Chat Bike Members News Women
Viewing 10 posts - 1 through 10 (of 10 total)
  • 2010 Manitou Minute 29er fork spring
  • lipseal
    Free Member

    Anyone know where I can get an extra firm spring for the above?

    Posted 13 years ago
    Clink
    Full Member

    Talk to Hotlines? Always been helpful when I've e-mailed.

    Posted 13 years ago
    singlespeedstu
    Full Member

    If it's for the 120mm fork the part number's 83-3177.
    Hotlines might even have one in stock.

    Posted 13 years ago
    lipseal
    Free Member

    It's for the 100mm version, I'll give hotlines a call tomorrow.

    Posted 13 years ago
    singlespeedstu
    Full Member

    For 100mm you need 83-3172

    Posted 13 years ago
    lipseal
    Free Member

    Cheers thanks for part numbers. Hope it's easy to change?

    Posted 13 years ago
    singlespeedstu
    Full Member

    i've mailed you the service manual and parts diagram.

    it's the 2009 one but everything's the same.

    Posted 13 years ago
    lipseal
    Free Member

    Right spoke to hotlines they have informed me that the spring was used on the 2007 minute comp, if that's so would this….

    http://www.chainreactioncycles.com/Models.aspx?PartnerID=79&ModelID=38245

    ….be ok to use also tf tuned have an 2006 extra firm in stock, the tf one would be a better choice ❓

    Posted 13 years ago
    awesom-o
    Free Member

    I’m also looking for an x-firm spring/ride kit for 2010 Minute 29er 120mm…I phoned manitou USA and their tech support guy said the parts diagram for the 29er minute forks in the 2009 service manual is wrong. He said the parts listed under the 29er fork are for the 26er. He gave me part number 141-26744-K003. I had already ordered part number 83-3177 as per the manual and the above post but he said that part is for the 26″ model. I phoned hotlines and TF tuned with the part number and they said it didn’t show up on their system at all and it doesn’t come up in any web searches. Manitou USA have them in stock but only sell to dealers. I’m confused? Can anyone shed any light on this?

    Posted 13 years ago
    rootes1
    Full Member

    As a slight hijack, anyone altered the travel of the 29er minutes? Which parts need changing? Manitou seem a bit deficient in thewebsite tech resources/downloads….

    Posted 13 years ago
Viewing 10 posts - 1 through 10 (of 10 total)

The topic ‘2010 Manitou Minute 29er fork spring’ is closed to new replies.

Overview Chat Bike Members News Women