Viewing 7 posts - 1 through 7 (of 7 total)
  • 1×10 … WILL IT WORK, PLEASE HELP!!
  • rocklobster
    Free Member

    Hi

    I am thinking of running a 2×10 setup on my hardtail MTB with the following setup, will this work?

    Sram XX 10 Speed Rear Mech (Medium Cage)
    Sram XX 10 Speed Cassette
    Shimano XT Crank with Raceface 32t Single Speed Chainring.
    SRAM PC1070 10-Speed Bike Chain

    Do I need a chain guide? If yes I was thinking the:

    e.13 XCX Bottom Bracket Guide 32-42 tooth

    munrobiker
    Free Member

    You’ll almost certainly need a guide. The e13 xcxs are superb.

    Otherwise, sounds fine.

    tomhoward
    Full Member

    what shifter?

    and you might struggle to get it to do 2×10 😉

    Fresh Goods Friday 696: The Middling Edition

    Fresh Goods Friday 696: The Middlin...
    Latest Singletrack Videos
    njee20
    Free Member

    Yes, and you will need a guide, but if you’re prepared to spend XX money, why not go XX1, negates the need for a guide then, and gives a better range.

    gravity-slave
    Free Member

    Does your frame have ISCG tabs? If so, I’d go for the e13 XCX but in ISCG mount, more spacing options and doesn’t need re-setting up when you replace the BB. If no tabs, BB is fine. e13 is a great device.

    ChunkyMTB
    Free Member

    NW chainring?

    adsh
    Free Member

    STOP SHOUTING IN YOUR TITLES

Viewing 7 posts - 1 through 7 (of 7 total)

The topic ‘1×10 … WILL IT WORK, PLEASE HELP!!’ is closed to new replies.