Viewing 3 posts - 1 through 3 (of 3 total)
  • 1.5/tapered crown race
  • dangeourbrain
    Free Member

    What – Short of buying the proper tool which I’ll probably only use twice – is the accepted method of seating one?

    1.125 was perfect with a bit of 30mm pollypipe but I think 40mm waste pipe will be too brittle for the 1.5 race.

    I’m not over keen on the idea of smacking things with a lump of wood/hammer on opposite sides, so what’s the upmarket ghetto tool? Or do I just take it to the lbs and try not to offend them when I ask them to “fix ” the stuff I didn’t buy from them.

    steezysix
    Free Member

    Just cut lengthwise slots in the end of the 30mm pipe to allow it to flare out as you push it down the steerer?

    dangeourbrain
    Free Member

    Cunning!

    Fresh Goods Friday 696: The Middling Edition

    Fresh Goods Friday 696: The Middlin...
    Latest Singletrack Videos
Viewing 3 posts - 1 through 3 (of 3 total)

The topic ‘1.5/tapered crown race’ is closed to new replies.