Viewing 9 posts - 1 through 9 (of 9 total)
  • 140mm Fox Floats on a cotic soda?
  • soops
    Free Member

    As the title says.
    What do you reckon?
    Ok or not?

    8)

    ir_bandito
    Free Member

    What's the axle to crown?
    I run 130mm Marzocchis on my Simple which are about 520mm and I love it.
    Does the Soda have the same geometry?

    MountainMutant
    Free Member

    Too long. I run 140 talas on mine at 120mm. Handles great

    I run the 140 when I am doing big downhills in Spain. I think a 140 fixed length fork is too long for everyday use.

    MM

    soops
    Free Member

    Cheers guys
    I was think of running them with a touch more sag to lower the front a bit.Does that sound about right?

    jamesgarbett
    Free Member

    You could reduce the travel internally

    soops
    Free Member

    ir_bandito
    yes the geometry is the same. and it is 520mm axle to crown.
    Is the extra 10mm going to cause to much extra stress on the frame?

    ir_bandito
    Free Member

    shouldn't have thought so – send an email to Cotic to check. Ultimately, it depends if you're an 8st xc whippet riding round Thetford (should be fine) or a 20st biffer riding in the Alps (you'll probably break it).

    metalheart
    Free Member

    if its the same deal as the Soul then you'll void your warranty.

    theres a post on here somewhere saying Cotic allow 130mm or some measurement I forget whichever is the smaller…

    personally if its the same geometry I'd not like it much as a soul is wandery enough at (Van) 125mm.

    soops
    Free Member

    cheers metalheart i am going to contact cotic today

Viewing 9 posts - 1 through 9 (of 9 total)

The topic ‘140mm Fox Floats on a cotic soda?’ is closed to new replies.