Viewing 12 posts - 1 through 12 (of 12 total)
  • 11 x 1 – probably daft question
  • Pz_Steve
    Full Member

    Hi everyone,

    Probably a daft question so excuse the lack of knowledge…

    I’m currently running XT 10 x 3 drive-train with a clutch derailleur. If I wanted to go 11 x 1 would the existing rear mech work, or would I have to replace the whole shebang?

    Thanks!

    wwaswas
    Full Member

    It’d be shebang time.

    njee20
    Free Member

    He’s right!

    Pz_Steve
    Full Member

    Mmmm, that’s what I thought (though not what I wanted to hear).

    Thanks anyway – speedy replies!!

    honourablegeorge
    Full Member

    1×11 means new freewheel, cassette. chain. mech and shifter and a new front chainring.

    1×10 – you can most likely use all your current kit, just need a Hope T-Rex or similar, and a narrow/wide ring up front

    creagbhan
    Full Member

    +1^. Just waiting for RF n/w from Tweeks and hope t-rex from UK Bikestore. Cheapest I could find 😀

    Northwind
    Full Member

    Yeah, you could get within 1 tooth with a 1×10 setup. It’s not as good but it’s a hell of a lot cheaper, and avoids million pound consumables.

    dangeourbrain
    Free Member

    I can’t help but think of spinal tap every time some one mentions 11 speed.

    Unless there is new kit out which that I’ve not seen (distinctly possible) that will run on a standard 9/10 speed body you’d need new wheels/free hub too to go 11 speed

    wwaswas
    Full Member

    New XTR is 11 speed on a standard freehub.

    dangeourbrain
    Free Member

    Yep just read that post. Now feel foolish.

    wwaswas
    Full Member

    🙂

    mikewsmith
    Free Member

    New XTR is 11-40 so nothing more than is currently available but way more expensive.

Viewing 12 posts - 1 through 12 (of 12 total)

The topic ‘11 x 1 – probably daft question’ is closed to new replies.