Viewing 7 posts - 1 through 7 (of 7 total)
  • 11 speed quick link on a 10 speed chain
  • zilog6128
    Full Member

    D’oh, stuck the wrong quick links in my pack. Will I die?

    drofluf
    Free Member

    Aren’t 11 speed chains narrower than 10 speed? If so I doubt that the link will fit

    rickmeister
    Full Member

    Probably won’t die, but may be in for a long walk as above.

    11spd is narrower than 10 speed… may not work

    zilog6128
    Full Member

    ok ta, suspected that might be the case, fortunately there’s a Halfords not too far away 🙂

    djtom
    Free Member

    As above, 11spd chains are narrower than 10spd. You won’t be able to do the link up.
    Been there, walked home.

    mrblobby
    Free Member

    Isn’t it just the plates that are narrower? I think the spacing between the plates is the same. Might be wrong though!

    Edit.. explained here..

    http://velonews.competitor.com/2016/01/bikes-and-tech/technical-faq/tech-faq-chain-width-explained-compatibility-queries-answered_392163

    Inner width is unchanged, outer width is narrower. So an 11sp link could possibly work.

    sideshow
    Free Member

    been there done that

    iirc the link went on but was very stiff and the chain kept skipping at that point, or did I get chain suck, can’t quite recall – something like that.

Viewing 7 posts - 1 through 7 (of 7 total)

The topic ‘11 speed quick link on a 10 speed chain’ is closed to new replies.