Overview Chat Bike Members News Women
Viewing 6 posts - 1 through 6 (of 6 total)
  • 10 speed dyna-sys and drop bar shifters.
  • Nipper99
    Free Member

    What drop bar shifters would work with 10 speeed dyna-sys xt rear mech? I have old type 105 10 speed shifters and run 9 speed rear mech on 10 speed 11/36 but they don;t work the dyna-sys (different pull ratio or some such).

    Posted 11 years ago
    cynic-al
    Free Member

    I don’t think any will – pull is 200% IIRC. Might be worth googling to see if any sram ones do by chance.

    Posted 11 years ago
    Mister-P
    Free Member

    None do. If you want drop bar 10 speed shifters with an 11-36 10 speed cassette you need a 9 speed Shadow rear mech.

    Posted 11 years ago
    mboy
    Free Member

    As cynic-al said, none will.

    The good news is that any non Dynasys rear mech will work fine with them though, so just sell the 10spd XT mech and buy a 9spd one!

    Posted 11 years ago
    Rorschach
    Free Member

    I’ve run 10 speed 105 (5600) on a 10 speed cassette/9 speed rear mech for the last couple of years (It is a 34t though).Have you tried a longer B-tension screw or is it not indexing at all?

    Posted 11 years ago
    Nipper99
    Free Member

    Hmm. What I thought. I have my Gryphon set up as above with the 9spd rear mech and 10spd sti. Wanted to use the other on a new build cx – bar end shifter possibly.

    Posted 11 years ago
Viewing 6 posts - 1 through 6 (of 6 total)

The topic ‘10 speed dyna-sys and drop bar shifters.’ is closed to new replies.

Overview Chat Bike Members News Women