10 speed chain on an 11 speed chain ring

Home Forum Bike Forum 10 speed chain on an 11 speed chain ring

Viewing 5 posts - 1 through 5 (of 5 total)
  • 10 speed chain on an 11 speed chain ring
  • Premier Icon deadkenny
    Subscriber

    Do you mean running an XX1 chainring/crank with a 10 speed cassette & mech?

    XX1 chainring runs fine with a 10 speed set up. Friend of mine does exactly this.

    If you’re looking to do this, cheaper option is a thick/thin chainring from Works Components / Wolf Tooth / Raceface / and loads of others. They all do the same job. They work best with a 10 speed chain (even on a 9 speed set up).

    Sorry, but It will fail & u will surely die.

    R.I.P.

    PH1
    Member

    Yes, I was thinking of buying a xx1crank set. I need a new crank and chain ring so was going to buy both as it works out fairly cheap.
    Thanks,

    P

    PH1
    Member

    Hello,

    Will the above work. E.g. An xx1 chain set with a SRAM 10 speed chain…. And not be too loose and fall off?

    Thanks,

    P

Viewing 5 posts - 1 through 5 (of 5 total)

The topic ‘10 speed chain on an 11 speed chain ring’ is closed to new replies.

Comments are closed, but trackbacks are open.

Skip to top