Overview Chat Bike Members News Women
Viewing 6 posts - 1 through 6 (of 6 total)
  • 08 SC Superlight – RP23 Shock Pressures
  • dickie
    Free Member

    I’ve just finished building a Superlight & set up the shock sag. SC website suggests for my weight, 14st’ish about 150psi’ish.
    120 psi seams to give about near 10mm sag but on first ride last night this still felt to hard. Riding without ProPedal switched on.
    Shock has standard size air can.

    Whats everyone else with a Superlight riding pressure wise?

    Posted 14 years ago
    trickydisco
    Free Member

    72kg – 125psi

    There’s the superlight tech info set up page

    or look at the TF tune shock set up guide (under sag and how to measure it)

    (superlight uses 7.875 x 2.0″/ 200x50mm shock size)

    Posted 14 years ago
    dickie
    Free Member

    Thanks very aware of both hence my ref to sc website.

    Posted 14 years ago
    Travis
    Full Member

    I did hear that you do what they say + 10% as they sag to much.

    I think it’s more about personal choice. I run mine stiffer than normal, as I live in a very rocky area and it tends then to loosen up (or I might feel that) towards the end of the ride.

    Not much help. Sorry

    Posted 14 years ago
    cynic-al
    Free Member

    I’d experiment and use what suits you rather than wory about guidelines.

    Posted 14 years ago
    flowmtbguy
    Free Member

    what cynic-al says. set the sag and go – ignore what the gage says until you’ve got it right. then try and remember that number if you need to re-set it.

    Posted 14 years ago
Viewing 6 posts - 1 through 6 (of 6 total)

The topic ‘08 SC Superlight – RP23 Shock Pressures’ is closed to new replies.

Overview Chat Bike Members News Women