Sea Otter 2017: Whyte S-150

by 1

Whyte Bicycles chose the Sea Otter as the place to launch the brand new S-150 29er and we were lucky enough to get a full tour of this new, carbon long travel machine.

seaotter2017-_whyte001

The S-150 is a 29in wheeled bike with an aggressive 150mm of travel front and rear. In keeping with the rest of its popular 27.5in trail bikes, it’s long, low and slack. In fact, the quoted head angle is 65.5°, which is bonkers slack for a 29er and gives you some idea of the kind of terrain that Whyte expects this bike to be thrown down.

 

seaotter2017-_whyte003
In keeping with the long and low look, the seat tube barely increases with frame size – it simply comes with a longer dropper.
seaotter2017-_whyte004
The S-150 is specced with a 150mm Pike 29er – the first we’ve seen on a complete bike.
seaotter2017-_whyte005
Whyte hasn’t made a carbon 29er before, so this is a big thing. And it’s a big bike…

A big change with the frame is a move to larger pivot bearings for greater stiffness – and then alloy hardware to knock the weight back down. As with other Whytes, the bearings are guaranteed for life.

seaotter2017-_whyte006
Trouble-free bearings
seaotter2017-_whyte007
The (alloy) seatstays have two-sided clevis pivots for greater stiffness.

It won’t surprise you to find that the S-150 has been designer without regard to front mech compatibility. In a similar move, it’s been kept up to date with a Boost rear end and a metric rear shock. Interestingly, our guy at Whyte didn’t particularly know if the frame would take a 27.5in with a plus tyre, which is something we like – this is obviously a bike designed just for 29in wheels without compromise. Fatter, smaller wheels might fit, but that’s a bonus if they do.

seaotter2017-_whyte008
Room for pretty big rubber and room for BIG chainrings
seaotter2017-_whyte009
Teeny tiny stem fits in with Whyte’s ‘long front centre’ philosophy
seaotter2017-_whyte010
A rubber boot keeps the seat tube crud free and how about that neat binder bolt?

The bike (obviously) has room for a bottle cage up front. The bottom bracket shell is 73mm threaded for creak-free performance in the UK. A neat Whyte-branded rubber bash plate keeps rock strikes from making you wince. As you’d expect from a 1x only bike, SRAM’s gears have been

seaotter2017-_whyte011
Rubber armour for the downtube…
seaotter2017-_whyte012
A nicely clean non-driveside shot of the Whyte S-150

And, so when can you get to see this beauty? Well, we have heard that specs and pricing will appear in July, with the bikes arriving in the UK in August. However, we expect that the Whyte pro enduro team will get some special treatment, so expect a sneaky peek at an enduro race near you soon. And talking of spec, this is the RS spec of the bike. Given Whyte’s general nomenclature of bike spec, we’re going to extrapolate that and say that you’ll probably be able to see a more affordable specced bike – and perhaps a full-on factory race version too. Watch this space!

seaotter2017-_whyte013
Clean lines for such a big bike!
Chipps Chippendale

Singletrackworld's Editor At Large

With 22 years as Editor of Singletrack World Magazine, Chipps is the longest-running mountain bike magazine editor in the world. He started in the bike trade in 1990 and became a full time mountain bike journalist at the start of 1994. Over the last 30 years as a bike writer and photographer, he has seen mountain bike culture flourish, strengthen and diversify and bike technology go from rigid steel frames to fully suspended carbon fibre (and sometimes back to rigid steel as well.)

More posts from Chipps

Comments (1)

Leave Reply